Base Oil, Base Oil SN 150, SN500, Group1, Group 2 Virgin and Re-Refined ( Recycled ) Base Oil

Base Oil Division

Base Oil, both Virgin & Re-Refined ( Recycled ) grades of SN150, SN300, SN500 are being exported in Flexitanks..

Base Oil Division

Base stocks are called by several names: Neutrals (SN100, SN150, 6SN650,) &Bright Stocks, Grades (SAE 5, 10…; ISO 22, 32..).

Base Oil Division

The most common names are for group I (SN: Solvent Neutral), for group II (N: Neutrals) and group III grade names refer to the viscosity (4cst, 6cst, 8cst …).

BASE OIL DIVISION - Group II

GROUP II BASE OIL

Hydro processing and Refining

Group II base oils are common in mineral based motor oils currently available on the market. They have fair to good performance in lubricating properties such as volatility, oxidative stability and flash/fire points. They have only fair performance in areas such as pour point, cold crank viscosity and extreme pressure wear.
Grades - 60N, 100N ,150N ,500N 600N and 150BS

Manufactured by using hydro treating and Texaco's MEK (Methyl-Ethyl-Ketone) de-waxing process. These oils are widely accepted in the industrial, marine and mechanic oils as well as in automotive engine oils.

TECHNICAL SPECIFICATIONS

PARAMETERS		ASTM	60N	100N	150N	500N	600N	150BS
Specific Gravity, 15/4°C		D1298	0.8773	0.8520	0.8666	0.8811	0.8817	0.8940
Colour, Say bolt		D1500	L0.5	L0.5	L1.0	L2.0	L1.5	L2.0
Kinetic Viscosity	@40,cSt	D445	7.498	20.31	30.14	95.79	115	480.6
	@100,cSt		2.036	4.166	5.189	10.97	12.43	31.32
Viscosity Index		D2270	66	107	101	99	97	98
Flash Point, °C(COC)		D92	156	208	212	242	253	310
Pour Point, °C		D97	-20.0	-15.0	-12.5	-12.5	-12.5	-12.5
Sulphur Content, wt ppm		D5453	<10	<10	<100	<100	<100	<100
Carbon Residue(CCR), wt%		D189	<0.01	0.01	0.04	0.01	0.01	0.01
Copper Corrosion, 100°C/3hr		D130	1a	1a	1a	1a	1a	1a
TAN, mgKOH/g		D974	<0.01	<0.01	<0.01	<0.01	<0.01	<0.01
Ring Analysis,	wt%CA		8.4	2.2	1.8	7.2	6.4	7.3
	wt%CN	D3238	42.5	29.4	32.1	26.0	26.5	21.7
	wt%CP		49.1	68.4	66.1	66.8	67.1	71.0
Aniline Point, °C		D611	77.8	107.0	107.1	116.3	116.9	129.7

<< Data Sheets click here >>

Base Oil Group I

Base Oil Group II

Base Oil Group III

Base Oil Group IV & V

Base Oil Re-Refined

Base Oil Process

Home Press Releases Terms and Conditions Privacy Policy

Copyrights 2003 Benzene International Pte Ltd @ All Rights Reserved.10, Bukit Batok Crescent, #04-04 The Spire, Singapore 658079. E:sales@benzeneinternational.com | T:+65 63372735 | F:+65 63372734 | M:+65 90275040. Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.© 2003 Benzene International Pte Ltd .The Benzene International logotype (and any other trademarks) are trademarks of Benzene International Pte Ltd or one of its subsidiaries.